Part Number: 21725149
/Vendor ID Number: 1139477
/Custom:
PFERD 21725149
by PFERD
Call For Price
Call for Availability
Add To Quote
Add To Estimate
Add To Wishlist
Compare Item
Qty
Product Overview
PFERD Bearing Carbide Bur Edge Cut System 1/8" Radius 1/8" Radius 5/8" x 1/8", 1/4
EDGE cut tungsten carbide burs have been specifically developed for precise work on edges. The special design allows the bur to run directly along edges without damaging the workpiece. Exact edges can be created in a single step - with either defined chamfers of 30° or 45°, or to a defined radius of 1/8". Rounding edges is a precautionary measure against corrosion according to: ISO 129443, ISO 85013, SOLAS XII/6.3 (Ref. T4/3.01 MSC.1/Circ.1198). Concave radius bur for producing precise rounded edges. Cannot be re-sharpened. Designed for producing and finishing edges with an 1/8" outer radius." The EDGE Cutting System includes EDGE cut burs and a special guide sleeve that can be mounted into a conventional power tool collet to ensure optimal guidance during light deburring work.
Product Availability
Item is usually in stock, but we'll be in touch if there's a problem
Use the burs counterrotationally for quick stock removal. For a fine surface finish, run the bur back over the edges in the same direction of rotation.
Recommendations for use 1:
If possible, use burs with the EDGE cut with the PFERD compressed-air straight grinder PG 3/210 with the matching guide sleeve EFH PG 3/210.
Recommendations for use 2:
The smaller the bur diameter is in the area being used, the higher the recommended rotational speed can be.
REFERENCE_FEATURE_GROUP_ID:
P_15344_178415
RPM from, grey cast iron, white cast iron:
12000
RPM from, grey cast iron, white cast iron UNIT:
RPM
RPM from, hard non-ferrous metals:
5000
RPM from, hard non-ferrous metals UNIT:
RPM
RPM from, hardened, heat-treated steels over 370 H: